SANIFOS 610

The SFA know-how for sewage lifting 

  • Single-phase or Three-phase version
  • One or two Dilacrator or Vortex pumps
  • Complete standard equipment


Application

  • Commercial use
  • Community use
  • Individual use

SANIFOS® 610 is a lifting station for sewage to be buried. It consists of a 610 litre tank and one or two pumps with float switch.

Each pump incorporates either the SFA maceration system with ProX K2 knife for discharge through small diameters or a vortex impeller. Its high-density polyethylene tank offers high mechanical resistance and is resistant to chemical attack.

SANIFOS® 610 is delivered with its hydraulic system with shut-off valve and non-return valve and also with an external wired alarm. It offers 4 drilling zones. Its 40 cm extension, available as an accessory, allows flexible installation.

This underground lifting station is manufactured in France in the SFA factory in Brégy (60). It has thus received the Guarantee of French Origin.

Data sheet

Weight
SANIFOS® 610 - 1 pump: 68 kg SANIFOS® 610 - 2 pumps: 88 kg
Inlet diameter
6 inlets Ø ext. 50/40/100/110/125
Motor power
1500 W
Supply voltage
Single phase: 230V/50-60Hz Three phase: 400V/50-60Hz
IP rating
IP68
Maximum flow rate
SANIFOS® 610 Dilaceration Single-phase - 1 & 2 pumps: 16 m3/h SANIFOS® 610 Vortex Single-phase - 1 & 2 pumps: 22 m3/h SANIFOS® 610 Vortex Three-phase - 2 pumps: 33 m3/h
Maximum absorbed current
SANIFOS® 610 Single-phase - 1 pump: 6 A ; SANIFOS® 610 Single-phase - 2 pumps: 2 x 6 A ; SANIFOS® 610 Three-phase - 2 pumps: 2 x 4.75 A
Maximum incoming water temperature
70 °C intermittently (max 5 min)
Discharge pipe diameter
SANIFOS® 610 Dilacération DN 40 (ext.50) SANIFOS® 610 Vortex : DN 50 (ext. 63)
Maximum recommended depth
SANIFOS® 610 Macerator Single-phase - 1 & 2 pumps: 11 m SANIFOS® 610 Vortex Single-phase - 1 & 2 pumps: 11 m SANIFOS® 610 Vortex Three-phase - 2 pumps: 15 m
Tank volume
610 L
Vent diameter
2 x Ø ext. 75
Maximum depth (Q eq 0 m3/h)
SANIFOS® 610 Macerator Single-phase - 1 & 2 pumps: 14 m SANIFOS® 610 Vortex Single-phase - 1 & 2 pumps: 13 m SANIFOS® 610 Vortex Three-phase - 2 pumps: 16 m
ON/OFF level
650/150 mm
Materials
Polyethylene
Incoming water flow (FEA)
1 pump: 325-580 mm (with extension: 725-980 mm) 2 pumps: 325-610 mm (with extension: 725-1,010 mm)
Activation method
Float
Check valve
Yes

SANIFOS 610

  • Commercial use
  • Community use
  • Individual use